SYNC

BINDING FOR SYNC
BINDING FOR SYNC 1. Connect pin 7 to pin 8 of your receiver to switch it to binding mode. 2. Connect sbus port to the gimbal, turn gimbal ON to supply ...
Mon, 5 Feb, 2018 at 11:29 AM
SYNC FAQ
  SYNC FAQ Upgrading firmware process for SYNC Power ON the SYNC. Connect the SYNC to PC using Micro-USB type B cable. Run gTuneDesktop software. Just...
Wed, 14 Nov, 2018 at 10:39 AM
SYNC with Ronin
1. Is it possible to control a Ronin by SYNC? Yes, it’s possible. The videos below are something you can refer to. 2. Which Ronin series gimbal do...
Wed, 14 Nov, 2018 at 10:37 AM