Step 1: Install the latest Software/App and upgrade the lasted Firmware 


Software : 


Firmware : 

  • Pixy F Firmware
  • Pixy U Firmware




Step 2: Connect Gremsy gimbal to GPS of Flight controller A3/N3

Connect CAN cable from CAN port on S1 mounting to CAN1 port on A3 flight controller.

Figure 1 : CAN1 port split via CAN-Hub

Figure 2 :  CAN port on S1 mounting

Connection mapping : 



Step 3: Select Single or Dual Mode

At Single Mode, in software: Go to Setting -> Controls -> LightBridge 2 -> Single

Move GIMBAL DIAL on the remote to turn on the motors.

- Toggle C1 to change mode, the mode will be : lock -> follow -> mapping

- Toggle C2 to switch control between Tilt and Pan


At Dual Mode, in software: Go to Setting -> Controls -> LightBridge 2 -> Dual

Move GIMBAL DIAL on the remote to turn on the motors.

- Use Tilt/roll/pan stick to control tilt/roll/pan.

- Toggle C1 to change mode, the mode will be : lock -> follow -> mapping



Follow the video tutorial :