How to setup with RX100V and Seagull UAV : Gremsy

How to setup with RX100V and Seagull UAV Print

Created by: Gremsy Support

Modified on: Fri, 16 Mar, 2018 at 3:36 PM

Step 1 : Prepare Accessories

If you lose something, refer here : Gremsy Store

Step 2 : Connect to gimbal

Step 2a : Check before using gimbal

Step 2b : Connect Seagull UAV module to AUX port and camera ( Green , Blue and Yellow lines )

Step 2c : Connect camera to CONNEX mini ari unit

Step 2d : Connect reciever to AUX port and SBUS port on Hyper Quick Release

Step 3: Testing camera control

Setting up Seagull #REC could not be easier!

Simply select the channels that #REC is connected to, and trim the LOW/HIGH values for those channels, until the desired modes are met–refer to Seagull manual

Learn more at :

G

Gremsy is the author of this solution article.

Did you find it helpful? Yes No

Help Desk Software by Freshdesk Support Desk