How to setup with Blackmagic Micro Cinema Camera : Gremsy

How to setup with Blackmagic Micro Cinema Camera Print

Created by: Gremsy Support

Modified on: Thu, 26 Apr, 2018 at 8:24 AM

Step 1: Prepare Accessories

If you lose something, refer here: Gremsy Store

Step 2: Connect to gimbal

Cable connection mapping

Step 2a: Connect video transmitter to gimbal via AUX port ( Red line and Organge line for power, Yellow line for video signal. )

Step 2b: Connect SBUS signal from Blackmagic video signal ( Green and Blue line )

Step 2c : Plug Y cable into SBUS on Hyper Quick Release

Step 2d : Connect Blackmagic camera to AUX port.

Step 3 : Setup channels control.
Setting channel on monitor or blackmagic app.

Note : You mustn't setup camera control channels replace gimbal control chanels ( Recommend from channel 10 )

Learn more at:

G

Gremsy is the author of this solution article.

Did you find it helpful? Yes No

Help Desk Software by Freshdesk