This article is used in the case the user need to control the tilt only and the pan will follow drone movements. That means the pan should be in follow mode and the tilt should be in lock mode.

The below are the setting we need for this demand.

  1. Turn the gimbal to FOLLOW mode

Now both tilt and pan will be turned to follow mode, we need the pan to get highest speed, its smoothness and  window should be lowest.

So, we need to go to Setting -> Follow -> Pan screen and adjust the parameters here

  • Speed: 255
  • Smooth: 0
  • Window : 0

        2. Enable Tilt Lock

            This means the tilt axis is controllable although the gimbal is in follow mode. In the screenshot below, you should slide the switch to the left to enable