Start a new topic

[New update] How to control Gremsy gimbal on M600/M600 pro ( A3/A3 pro FC)?

Gremsy has been updated new control protocol for M600 control, this is applied for Pixy U, T3V3, S1V3, T7 ( T3V2 ,S1V2 and Pixy F will be updated soon )


Find the latest firmware here : Official Firmware Download 


What's new?


Control gimbal in the follow mode


-Gimbal allows control in follow mode


Control gimbal with LightBridge 2 with DJI's Remote Control.


In Single mode

C1 button switch mode (LOCK -> FOLLOW -> MAPPING)

C2 button switch control between TILT and PAN axis.

C2 button press hold > 2 seconds. Turn off Gimbal.


In Dual Mode

C1 button switch mode (LOCK  FOLLOW  MAPPING)

C2 button press hold > 2 seconds. Turn off Gimbal.


Step to configure 


Step 1 : Upgrade to the latest firmware and software version.


Step 2 : Connect the gimbal to A3/A3 Pro Flight Controller


- Connect the COM 2 port on gimbal quick release to CAN 1 on the A3/A3 Pro FC (GPS) 


Step 3 : Configure on Gtune software/app

- On the Gtune software/app, go to Settings -> Control -> Lightbridge 2 (LB2) -> choose yes to enable and configure your control type - single/dual 

Refer to : 



Login or Signup to post a comment